Menu

Water Damage Restoration – A Brief Preview

0 Comments

It’s the procedure of repairing a home or property to its pre loss condition. Harm to the property might be as a result of an overflow, flood or some other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage due to water guide could be the benchmark tool that’s utilized by companies that specialize in restoration of water damage.
water damage restoration Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the very first and the main part of water damage restoration. The assessment needs to be correct so an appropriate response could be taken. In restorating the damage due to water, technicians and the insurance companies must come together and know what is damaged and how to go about restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is on the basis of the contamination levels of the water source. The categories are listed below

Category 1 – That is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – That is water that’s some contaminants like water from a dishwasher, washing machine or toilet with urine.

Category 3 – That is water that’s highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

After the evaluation is complete, the procedure of drying and decontaminating begins at the site. On the basis of the extent of damage, damage caused due to water could be classified into 4 types. Class 1 Damage- When loss is fixed to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is to the whole room and carpet area. Class 3 Damage – When the whole area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination needs to be achieved if contamination has been detected in the area. Decontamination may be achieved for your area or in specific pockets where contamination has been detected.

Leave a Reply

Your email address will not be published. Required fields are marked *